KVAD-200-BP

KVAD-200-BP

STANDARD CONSTRUCTION

• FRAME:
22 GA galvanized steel interlocking section.
• BLADES:
16 GA galvanized 2 "V" formed.
• BEARINGS:
Bronze Bearings.
• AXLES:
1/2 square zinc plated steel stud.
• INSULATION:
1/2" clean liner glass fiber
• FINISH:
- Mill Galvanized
• CONTROL ENCLOSURE:
NEMA1 control enclosure.
• GASKETS:
Rubber foam gaskets on blade and on air flow side.

OPTIONS:

1) 1" clean liner glass fiber.
2) Aluminum foil facing insulation.
3) Polymer closed cell foam.
4) Fiber glass covered with perforated sheet.
5) Metal noising outlet to cover insulation edges.
6) 20 GA galvanized casing.
7) Balancing damper on bypass side.
8) Flanged discharge.
9) Slip & drive connection.
10) Stand-alone control with room thermostat.
11) BACnet control with room thermostat.
12) Lon control with room thermostat.

Minimum Sizes:
6" round inlet.

Maximum Sizes
:
18"

Dampers are supplied 1/4" less than order width and height unless specified "actual size".