KVAD-100

KVAD-100

STANDARD CONSTRUCTION

• FRAME:
22 GA (0.85mm) galvanized steel interlocking section.
• BLADES:
16 GA (1.6mm) galvanized reinforced
• BEARINGS:
Bronze Bearings.
• AXLES:
0.47" (12mm) square/round zinc plated steel stud.
• INSULATION:
1/2" clean liner glass fiber
Mechanically fastened for added security.
• FINISH:
- Mill Galvanized
• FLOW SENSOR:
Center averaging air flow sensor.
• GASKETS:
Rubber gaskets mechanical locked on the blade.

OPTIONS:

CONSTRUCTION:
1) 20 GA (1mm) galvanized steel construction.
2) 1" clean liner glass fiber.
3) Aluminum foil facing insulation.
4) Polymer closed cell foam.
5) Fiber glass covered with perforated sheet.
6) Metal noising outlet to cover insulation edges.
7) Double wall construction.
8) 36" (900mm) long sound attenuator.

ADD:
1) Electric duct hater.
2) Hot water coil.

CONTROL:
1) NEMA1 control enclosure.
2) Primary transformer.
3) Single point power connection.
4) Factory mounting and wiring control
(Control supplied by other to KBE).
5) KBE stand-alone control with room thermostat.
6) BACnet/Lon DDC control with room thermostat.